OritatamiSim Simple Simulation Examples
Name
OritatamiSim Simple Simulation Examples
Description
The zip file below contains both the seed and system definition files for the delay 3 and delay 4 oritatami systems which cannot be simply simulated by smaller delays. Each system has two terminal configurations: one where the HINGE is in the up position and another where the HINGE is in the down position. A screenshot of each terminal configuration for each system is shown below.
Instructions for simulating systems
1) Download and install OritatamiSim.
2) Download File:Systems.zip.
3) Unzip the zip file and ensure all files are in the same directory.
4) Open OritatamiSim.
5) Click File -> Load assembly and then select either d3sim.oass or d4sim.oass. A box will appear asking you to set a random number seed, just click OK.
6) In order to make the seed configuration appear on the screen, click the zoom out icon once.
7) To simulate a step in the system, press Ctrl-f. The message panel will notify you when nondeterminism occurs.
8) To run the system again with a new random seed, press Ctrl-r, and enter -1 in the random seed window that appears.
