OritatamiSim Simple Simulation Examples
Name
OritatamiSim Simple Simulation Examples
Description
The zip file below contains both the seed and system definition files for the delay 3 and delay 4 oritatami systems which cannot be simply simulated by smaller delays. Each system has two terminal configurations: one where the HINGE is in the up position and another where the HINGE is in the down position. A screenshot of each terminal configuration for each system is shown below.
Instructions for simulating systems
1) Download and install OritatamiSim.
2) Download the zip file below in the Download section.
3) Unzip the zip file and ensure all files are in the same directory.
4) Open OritatamiSim.
5) Click File -> Load assembly and then select either d3sim.oass or d4sim.oass. A box will appear asking you to set a random number seed, just click OK.
6) In order to make the seed configuration appear on the screen, click the zoom out icon once.
7) To simulate a step in the system, press Ctrl-f. The message panel will notify you when nondeterminism occurs.
8) To run the system again with a new random seed, press Ctrl-r, and enter -1 in the random seed window that appears.
