Difference between revisions of "OritatamiSim Simple Simulation Examples"
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{SoftwareTemplate | {{SoftwareTemplate | ||
|Name=OritatamiSim Simple Simulation Examples | |Name=OritatamiSim Simple Simulation Examples | ||
| − | |Description=The zip file below contains both the seed and system definition files for the delay 3 and delay 4 oritatami systems which cannot be simply simulated by smaller delays. Each system has two terminal configurations: one where the HINGE is in the up position and another where the | + | |Description=The zip file below contains both the seed and system definition files for the delay 3 and delay 4 oritatami systems which cannot be simply simulated by smaller delays. Each system has two terminal configurations: one where the HINGE is in the up position and another where the HINGE is in the down position. A screenshot of each terminal configuration for each system is shown below. |
| + | <br> | ||
| + | <br> | ||
| + | '''Instructions for simulating systems''' | ||
| + | <br> | ||
| + | 1) Download and install [[OritatamiSim]]. | ||
| + | <br> | ||
| + | 2) Download [[File:Systems.zip]]. | ||
| + | <br> | ||
| + | 3) Unzip the zip file and ensure all files are in the same directory. | ||
| + | <br> | ||
| + | 4) Open OritatamiSim. | ||
| + | <br> | ||
| + | 5) Click File -> Load assembly and then select either d3sim.oass or d4sim.oass. A box will appear asking you to set a random number seed, just click OK. | ||
| + | <br> | ||
| + | 6) In order to make the seed configuration appear on the screen, click the zoom out icon once. | ||
| + | <br> | ||
| + | 7) To simulate a step in the system, press Ctrl-f. The message panel will notify you when nondeterminism occurs. | ||
| + | <br> | ||
| + | 8) To run the system again with a new random seed, press Ctrl-r, and enter -1 in the random seed window that appears. | ||
[[File:D3Down.PNG|thumb||center|upright=3.0|alt=d3Down|The terminal configuration of the delay 3 system where the HINGE is in the down position. Screenshot from OritatamiSim.]] | [[File:D3Down.PNG|thumb||center|upright=3.0|alt=d3Down|The terminal configuration of the delay 3 system where the HINGE is in the down position. Screenshot from OritatamiSim.]] | ||
| Line 11: | Line 30: | ||
[[File:D4Up.PNG|thumb||center|upright=3.0|alt=d4Up|The terminal configuration of the delay 4 system where the HINGE is in the up position. Screenshot from OritatamiSim.]] | [[File:D4Up.PNG|thumb||center|upright=3.0|alt=d4Up|The terminal configuration of the delay 4 system where the HINGE is in the up position. Screenshot from OritatamiSim.]] | ||
| − | |Download= | + | |Download=[[File:Systems.zip]] |
}} | }} | ||
Latest revision as of 14:27, 30 June 2017
Name
OritatamiSim Simple Simulation Examples
Description
The zip file below contains both the seed and system definition files for the delay 3 and delay 4 oritatami systems which cannot be simply simulated by smaller delays. Each system has two terminal configurations: one where the HINGE is in the up position and another where the HINGE is in the down position. A screenshot of each terminal configuration for each system is shown below.
Instructions for simulating systems
1) Download and install OritatamiSim.
2) Download File:Systems.zip.
3) Unzip the zip file and ensure all files are in the same directory.
4) Open OritatamiSim.
5) Click File -> Load assembly and then select either d3sim.oass or d4sim.oass. A box will appear asking you to set a random number seed, just click OK.
6) In order to make the seed configuration appear on the screen, click the zoom out icon once.
7) To simulate a step in the system, press Ctrl-f. The message panel will notify you when nondeterminism occurs.
8) To run the system again with a new random seed, press Ctrl-r, and enter -1 in the random seed window that appears.
